all eos power supplies have ul, csa and nemko safety compliance and medical versions meet ul60601 - 1 standards. all our products are rohs compliant. visit us at www.eospower.com . eos brand power supplies and patents are owned exclusively by eos power. all rights reserved. 4em - 10 - 0xx 39 - de60 - 44063 - 002/a 2 130w single and quad output ac/dc power supplies features : ? 130 w fan cooled rat- ing. ? smallest 130w ac/dc power supply ? small 5.0x3.14x1.025 inch form factor. ? dual channel output ? en61000 - 3 - 2 class a harmonics. ? en55022 and fcc part 15 level b ? cover kit accessory available. vlt130 series ac input auto ranging 90 to 132v 180 to 264v efficiency 82% typical input frequency 47 - 63 hz input current full load at low line 2.9arms , max inrush current high line , cold start 40a,max input specification model number output output voltage set point current no fan current 15cfm vlt130 - 1106 2 v1 3.3v 3.3v 20.0a 32.0a vlt130 - 1100 2 v1 5v 5.1v 16.0a 25.5a vlt130 - 1101 2 v1 12v 12.0v 6.6a 10.8a vlt130 - 1102 2 v1 15v 15.0v 5.4a 8.7a vlt130 - 1103 2 v1 24v 24.0v 3.3a 5.4a vlt130 - 1104 2 v1 48v 48.0v 1.7a 2.7a vlt130 - 4100 v1 v2 v3 v4 5v 3.3v 12v - 12v 5.1v 3.3v 12.7v - 12.7v 10.0a 10.0a 1.0a 1.0a 14.0a 16.0a 1.5a 1.5a vlt130 - 4101 v1 v2 v3 v4 5v 3.3v 24v - 12v 5.1v 3.3v 24.0v - 12.7v 10.0a 10.0a 1.0a 1.0a 14.0a 16.0a 1.5a 1.5a vlt130 - 4102 v1 v2 v3 v4 5v 3.3v 15v - 15v 5.1v 3.3v 16.3v - 16.3v 10.0a 10.0a 1.0a 1.0a 14.0a 16.0a 1.5a 1.5a vlt80ck metal cover kit accessory packing over 8 watts per cubic inch the dual - channel vlt130 family is ideal for data network- ing, industrial and multimedia applications. vlt130 has auto ranging 90v to 264v input and meets en55022 - b, fcc part 15 level b noise and class 2 safety approvals. the vlt130 family is rohs compliant and our factory is iso 14001 envi- ronmentally approved. world- wide safety standards apply and the power supply is fitted with ovp and ocp standard features as well as 1+1 redun- dancy and harmonic correction. high density and high efficiency are featured in the vlt130 ac/dc power supply. eos brand vlt130 family of power supplies utilize our patented resonant technology in a slim line 5.0?x3.14?x1.025? package and 82% power conversion efficiency. single and quad out- puts in all popular dc output configurations are available ranging from 3.3v to 48v and sin- gle wire current share . page 1
all eos power supplies have ul, csa and nemko safety compliance and medical versions meet ul60601 - 1 standards. all our products are rohs compliant. visit us at www.eospower.com . eos brand power supplies and patents are owned exclusively by eos power. all rights reserved. 4em - 10 - 0xx 39 - de60 - 44063 - 002/a 2 130w single and quad output ac/dc power supplies vlt130 series emc and safety specifications ce mark complies with the lvd emc en5022 - b,cispr22 - b, fcc part 15 class b, en50082 - 1 agency approval vde , ul, c - ul safety standard iec60950,en60950, ul60950, class 1 selv safety file number vde: 18934 - 3336 ul: e150565 operating tem- perature no derating 0 to 50 o c storage temperature - 40 to 85 o c cooling convection 80w relative humidity non condensing 95%, max mtbf bellcore tr332 >150,000 hrs environmental specification output specification output power 4.5 all outputs no fan all outputs with fan 80w max 130w max dc output see table hold - up time 115v/230v 10ms set point accuracy v1 and v2 v3 and v4 + 1% + 5% line regulation low line to high line + 0.3% load regulation mini to 50% & 50% max load v1 and v2 v3 and v4 + 1% + 5% minimum load single o/p models; other models 3.3v & 5v v1 & v2 v3 & v4 3a 0.5a 0.1a transient response to full load 50% to full load voltage deviation recovery time <7% <1ms ovp 3.3v output 5v output 5.1v, + 0.5v 6.2v, + 0.4v overload protection primary limited 195w, + 35w short circuit protec- tion auto recovery <6s short term ripple and noise 3.3v & 5v other voltages 50mv 1% power fail signal 2 ttl 2ms warning power good 2 delay after v1 high 30ms, min output rise time <10ms remote sense line compensation on v1 and v2 400mv redundancy 130w max 1+1 paralleling function no page 2
all eos power supplies have ul, csa and nemko safety compliance and medical versions meet ul60601 - 1 standards. all our products are rohs compliant. visit us at www.eospower.com . eos brand power supplies and patents are owned exclusively by eos power. all rights reserved. 4em - 10 - 0xx 39 - de60 - 44063 - 002/a 2 130w single and quad output ac/dc power supplies vlt130 series output connector j2 single output quad output pin1 no connection v3 pin2 v1b v3 pin3 dc return dc return pin4 dc return dc return pin5 v1a v1 pin6 no connection v4 mechanical specification ac input connector j1 molex 3 position, 0.156 center header 26 - 60 - 4030 or equivalent ground connector spade connector. dc output connector j2 tyco 282841 - 6 terminal block or equivalent size 5.0x3.14x1.025? weight 12oz (340g) output connector j3 molex22 - 23 - 2081 or equivalent input connector j1 pin1 neutral pin2 line input spade connector gnd ac ground output connector j3 single output quad output pin1 v1 current share v2 current share pin2 v1 current share v1 current share pin3 no connection power fall pin4 common common pin5 - v1a sense - v1 sense pin6 +v1a sense +v1 sense pin7 +v1b sense +v2 sense pin8 - v1b sense - v2 sense note: 1. maximum current per output. do not ex- ceed maximum output power rating. 2. power good and power fail signal on quad output models only. 3. the use of the remote sense function required 15cfm airflow. 4. quad output models: the output section of the vlt130 - 4xxx is split into 2 inde- pendently regulated channels. channel a consists of the main output v1 and auxil- iary output v4. channel b consist of the main output v3 and auxiliary output v3. the maximum output power that may be drawn per channel is 45w with convection cooling or 65w with fan cooling. 5. single output models: the output section of the vlt130 - 1xxx is split into 2 inde- pendently regulates channels. channel a consist of the main output v1a. channel b consist of the main output v1b. an internal shunt resistor of value 0 ohms connect both channels of the power supply. in an event whereby this shunt resistor is re- moved, the maximum output power that may be drawn per channel is 45w with convection cooling or 65w with fan cool- ing. page 3
|
